Defkalion: E-Catalyzer Market Strategy - Bullet Points
Thursday, June 23, 2011
Defkalion Green Technologies s.a. was established for the purpose to manufacture and release to the market products based on the Andrea Rossi E-Cat invention; essentially undertaking the path from invention to industrialization on a global scale. There is no government financing involved.
Science And Technology
Andrea Rossi and Sergio Foccardi have unquestionably succeeded with their invention (Hydrogen and Nickel exothermic reaction, calling it the Energy Catalyzer; commonly referred to as the E-Cat) to create and safely reproduce cheap and clean heat at room temperature conditions and with stable results. This process will create a new global energy era with profound and unequivocally positive social, economic and environmental implications.
Many have labeled Cold Fusion with positive and negative connotations. It has also been referred to as LENR and CANR. Most of these terms hold behind them thousands of hours of research work, all hoping to achieve the ultimate energy dream: limitless energy. However, overall, a stigma has created ambiguous feelings of aiming to reach the end of the rainbow. The science behind the products of Defkalion is none of the above, even though it is identified as such in current media coverage.
It is not the Holy Grail; simply put, it is an exothermic reaction between Nickel and Hydrogen that gives off heat; cheap, clean and green heat. This is a completely new field of science, one that is full of opportunities and challenges. It is a totally new emerging industry; one that will eventually revolutionize the energy sector.
As the leading company, Defkalion is ready to provide its full support to the scientific community at large in order to establish a global platform in this direction.
Product Status
The technology is currently in its final stages of becoming an industrialized and commercially viable prototype. This forms the basis for a broad range of products under the commercial name Hyperion. The current range of products produces surplus energy from 6 to 30 times more heat than energy consumed during its operation. Licensing of all Hyperion products is in progress. A fully functioning 1MW heat producing reactor will be inaugurated in Q4 of 2011.
Patents And Licensing
A national patent has been issued for Italy; the EU patent is on its final stage, while the global patent is pending. Hyperion patents are pending. EU safety certificates are in the process of issuance by the relevant authorities. Product tests will be similar to typical commercially available products with standardized procedures according to Performance; Stability; Functionality; and Safety.
Manufacturing And Factories
Our first factory is already in preparation phase, located in Xanthi, Northern Greece. It
has the following characteristics:
• 6,000m2 space
• Maximum production capacity of 300,000 units annually (kW and MW products)
• IT for monitoring the production line and product support
• Technical support to distribution channels
The assembly of products will include the following activities:
• Assembly of reactors (purchased from Defkalion)
• Build-up of final product (electronics, heat management, etc)
• Quality Control and Total Quality Management and Environmental Control
• Stress Tests and Functional Tests of end products
• Recharging of units
• Recycling procedures
The second factory is scheduled to be built in Xanthi within 2012, comprising of 12,000m2 for a larger assembly line. A third factory, belonging to Praxen Defkalion Green Technologies (Global) Ltd., shall operate as the producer of the industrial secret as the products’ kernel.
Total staff requirements for both factories will be around 380, and include technical expertise in the fields of: mechanical engineering, engineering, electronics, plumbing, data management, and auxiliary.
The 1MW Hyperion will be inaugurated in Q4 of 2011 with its production phase to commence in Q1 of 2012. This first 1MW reactor will be the first large scale unit based on multiples of the smaller Hyperion models in array. It will be used to partially cover the energy needs of the factory. It shall also be used as a show case unit.
With three factories located in Xanthi, the region shall gain in employment but also become an international hub where global investors and partners will visit the factory for business and product viewings.
Product Range
Although Hyperion models produce only heat energy, electricity can be generated with the application of existing third party technology. With regards to electricity generation, consumers will be able to receive a total solution based on mutually confirmed interoperability with third party technologies such as steam turbines and micro-steam turbines, Rankin new generation CHP, as well as intelligent heat management systems.
Hyperion products have different configurations, most notably:
• Series A: Single tube single module CHP: By this configuration, 5-10Kw heat power will be released to operate micro-CHP/micro turbine configurations
• Series B: Multi tube single module CHP: By this configuration, multiples of 5 or 10Kw heat power (max 30kW) can be integrated in the same box , when product has to operate (heat) bigger CHP/micro-CHP or steam turbine configurations
• Series C: Single tube single module heat only: By this configuration, 5-10Kw heat power will be released to operate small steam or hot water demands such as agricultural applications (green houses)
• Series D: Multi tube single module heat only: By this configuration, multiples of 5Kw heat power can be integrated in the same box , when product has to produce substantial amounts of heat for energy demanding applications
• Series E: Single or multi tube modules in parallel: To face the energy demands of big industrial installations at the range of MWs. Such products consists of arrays of A, B, or D series rack-mounted
• Series F: Single or multi tube modules in series: To accelerate power in different configurations
All kW range products have the following dimensions: 55x45x35cm
All MW range products are built within a 20” sized container
All products are connected to Defkalion main computers through on-line GSM for monitoring.
Hyperion advantages:
• Cheap: Hyperion can reduce the price of electricity by 90%
• Abundant: A typical Series C Hyperion 20kW product can generate up to 157 Mw in one year of operation. Regarding raw materials, Greece possesses 83% of Europe’s Nickel deposits. With its own usage, the price of creating Hydrogen will also become economically viable for its abundant use.
• Clean: The use of Hydrogen and Nickel produces Copper. There are no harmful to the environment substances during its production, use and afterlife.
• Green: no hazardous or toxic chemicals are required either in its production or in its consumption, unlike standard fossil fuel residuals.
• Safe: Analyses and tests for Performance, Stability, Functionality, and Safety will all be warranted from international accepted bodies to allay the fears of all potential nay-sayers that it is totally safe with zero radioactive emissions and zero harmful environmental emissions.
• Versatile: A broad spectrum of applications can benefit according to the level of output power. Hyperion products can be used in homes, hospitals, light industry, even propulsion. The extent to which is based on our continuing R&D efforts. Hyperion arguments
• Theories are difficult to kill, but a power-generating process is fairly easy to prove: does it release energy, or not? If the technology works, the theoretical controversy and academic debate won’t stop commercialization.
Read the full white paper released today here
Science And Technology
Andrea Rossi and Sergio Foccardi have unquestionably succeeded with their invention (Hydrogen and Nickel exothermic reaction, calling it the Energy Catalyzer; commonly referred to as the E-Cat) to create and safely reproduce cheap and clean heat at room temperature conditions and with stable results. This process will create a new global energy era with profound and unequivocally positive social, economic and environmental implications.
Many have labeled Cold Fusion with positive and negative connotations. It has also been referred to as LENR and CANR. Most of these terms hold behind them thousands of hours of research work, all hoping to achieve the ultimate energy dream: limitless energy. However, overall, a stigma has created ambiguous feelings of aiming to reach the end of the rainbow. The science behind the products of Defkalion is none of the above, even though it is identified as such in current media coverage.
It is not the Holy Grail; simply put, it is an exothermic reaction between Nickel and Hydrogen that gives off heat; cheap, clean and green heat. This is a completely new field of science, one that is full of opportunities and challenges. It is a totally new emerging industry; one that will eventually revolutionize the energy sector.
As the leading company, Defkalion is ready to provide its full support to the scientific community at large in order to establish a global platform in this direction.
Product Status
The technology is currently in its final stages of becoming an industrialized and commercially viable prototype. This forms the basis for a broad range of products under the commercial name Hyperion. The current range of products produces surplus energy from 6 to 30 times more heat than energy consumed during its operation. Licensing of all Hyperion products is in progress. A fully functioning 1MW heat producing reactor will be inaugurated in Q4 of 2011.
Patents And Licensing
A national patent has been issued for Italy; the EU patent is on its final stage, while the global patent is pending. Hyperion patents are pending. EU safety certificates are in the process of issuance by the relevant authorities. Product tests will be similar to typical commercially available products with standardized procedures according to Performance; Stability; Functionality; and Safety.
Manufacturing And Factories
Our first factory is already in preparation phase, located in Xanthi, Northern Greece. It
has the following characteristics:
• 6,000m2 space
• Maximum production capacity of 300,000 units annually (kW and MW products)
• IT for monitoring the production line and product support
• Technical support to distribution channels
The assembly of products will include the following activities:
• Assembly of reactors (purchased from Defkalion)
• Build-up of final product (electronics, heat management, etc)
• Quality Control and Total Quality Management and Environmental Control
• Stress Tests and Functional Tests of end products
• Recharging of units
• Recycling procedures
The second factory is scheduled to be built in Xanthi within 2012, comprising of 12,000m2 for a larger assembly line. A third factory, belonging to Praxen Defkalion Green Technologies (Global) Ltd., shall operate as the producer of the industrial secret as the products’ kernel.
Total staff requirements for both factories will be around 380, and include technical expertise in the fields of: mechanical engineering, engineering, electronics, plumbing, data management, and auxiliary.
The 1MW Hyperion will be inaugurated in Q4 of 2011 with its production phase to commence in Q1 of 2012. This first 1MW reactor will be the first large scale unit based on multiples of the smaller Hyperion models in array. It will be used to partially cover the energy needs of the factory. It shall also be used as a show case unit.
With three factories located in Xanthi, the region shall gain in employment but also become an international hub where global investors and partners will visit the factory for business and product viewings.
Product Range
Although Hyperion models produce only heat energy, electricity can be generated with the application of existing third party technology. With regards to electricity generation, consumers will be able to receive a total solution based on mutually confirmed interoperability with third party technologies such as steam turbines and micro-steam turbines, Rankin new generation CHP, as well as intelligent heat management systems.
Hyperion products have different configurations, most notably:
• Series A: Single tube single module CHP: By this configuration, 5-10Kw heat power will be released to operate micro-CHP/micro turbine configurations
• Series B: Multi tube single module CHP: By this configuration, multiples of 5 or 10Kw heat power (max 30kW) can be integrated in the same box , when product has to operate (heat) bigger CHP/micro-CHP or steam turbine configurations
• Series C: Single tube single module heat only: By this configuration, 5-10Kw heat power will be released to operate small steam or hot water demands such as agricultural applications (green houses)
• Series D: Multi tube single module heat only: By this configuration, multiples of 5Kw heat power can be integrated in the same box , when product has to produce substantial amounts of heat for energy demanding applications
• Series E: Single or multi tube modules in parallel: To face the energy demands of big industrial installations at the range of MWs. Such products consists of arrays of A, B, or D series rack-mounted
• Series F: Single or multi tube modules in series: To accelerate power in different configurations
All kW range products have the following dimensions: 55x45x35cm
All MW range products are built within a 20” sized container
All products are connected to Defkalion main computers through on-line GSM for monitoring.
Hyperion advantages:
• Cheap: Hyperion can reduce the price of electricity by 90%
• Abundant: A typical Series C Hyperion 20kW product can generate up to 157 Mw in one year of operation. Regarding raw materials, Greece possesses 83% of Europe’s Nickel deposits. With its own usage, the price of creating Hydrogen will also become economically viable for its abundant use.
• Clean: The use of Hydrogen and Nickel produces Copper. There are no harmful to the environment substances during its production, use and afterlife.
• Green: no hazardous or toxic chemicals are required either in its production or in its consumption, unlike standard fossil fuel residuals.
• Safe: Analyses and tests for Performance, Stability, Functionality, and Safety will all be warranted from international accepted bodies to allay the fears of all potential nay-sayers that it is totally safe with zero radioactive emissions and zero harmful environmental emissions.
• Versatile: A broad spectrum of applications can benefit according to the level of output power. Hyperion products can be used in homes, hospitals, light industry, even propulsion. The extent to which is based on our continuing R&D efforts. Hyperion arguments
• Theories are difficult to kill, but a power-generating process is fairly easy to prove: does it release energy, or not? If the technology works, the theoretical controversy and academic debate won’t stop commercialization.
Read the full white paper released today here
0 comments:
Post a Comment