eCat Self Sustained at Half A Megawatt With No Input For Over 5 Hours
Saturday, October 29, 2011
"According to the customer’s controller, Domenico Fioravanti, the plant released 2,635 kWh during five and a half hours of self sustained mode, which is equivalent to an average power of 479 kilowatts – just under half the promised power of one megawatt." NY Teknik
"There were some issues, so it couldn't be run at full power in self-looped mode, but what it did do was plenty impressive." - Sterling Allan, PESWIKI
![]() |
| On completion of the test. Small water leak is visible. |
Breakthrough
Sterling Allan's PESWIKI have posted their report of the events of the day which can be read here. http://pesn.com/2011/10/28/9501940_1_MW_E-Cat_Test_Successful/
http://db.tt/wu4OLbgk
Facebook Group: Your Thoughts On The Energy Catalyzer
Friday, June 17, 2011
Free/Cheap Energy IS the silver bullet for humanity. It empowers individuals and communities by making them completely independent and self-sustaining anywhere in the world. Fresh water is easily produced via energy-intensive water desalination and/or atmospheric water generation. Deserts can be turned into farmlands... Greenhouses can be erected in Alaska and Siberia... and even under seas and in outer space.
Self-sustaining abundance at the community level becomes a reality which brings an end to all war and conflict. A new renaissance is being born and Free/Cheap Energy advancement is helping lead the way.
consequences to humanity obvious. I guess for serious reasons the press have their hands tied or are awaiting official recognition?
and also people who are so desparate with affording their bills. I am more confident that the very next 'big' step will be the use on transport too. Cleaner and affordable to everyone - poor countries will be able to cope more too and concentrate on getting their money used more efficiently.
Dr Steven E Jones: Open Sourcing His 20x Overunity Circuit
Monday, May 30, 2011
Running it overnight he found the battery drained the next morning, but when he attempted the same experiment again using the modified circuit he found that there was "no noticeable change" in voltage in the battery even after powering the LED overnight for some 12 hours. By all accounts the battery should have drained significantly, certainly enough to be detectable.
See the videos here:
Dr Steven E Jones -Part1
Dr Steven E Jones -Part 2
Read Sterling's full report here on PESWIKI
Free Energy Truth: It's Our 4th Birthday
Friday, April 29, 2011
Free Energy Truth was first launched on 27th April 2007. Thank you to everyone who continues to support our efforts to bring the subject of free energy technology to the attention of the world. Thank-you to all the people who consistently share our videos, information and blogposts - your efforts are helping spread the word enormously.
We'll be here for as long as it takes to get the desired outcome - you can count on it.
The Silent Energy Revolution: Cold Fusion Gets The Cold Shoulder
Wednesday, April 6, 2011
The world doesn't know it yet, but we are standing on the verge of an energy revolution.
On the 14th January 2011, Italians Andrea A. Rossi and Sergio Focardi announced they had developed a working cold fusion technology capable of generating massive amounts of free energy in a ratio (33/1) that completely wipes the floor with conventional energy from fossil fuels. An amazing 400 watts input versus 15,000 watts output was demonstrated using their device - The Energy Catalyzer or E-Cat as it is known.
A successful test of the 10Kw reactor was demonstrated to 50 invited guests, media and engineers including representatives from the University of Bologna (The oldest University In The World). This university is now also engaged in a year long study of the device.
So what was the exotic fuel that was used to enable these physics busting energy gains? It's probably costly, hard to manufacture and in short supply - right?
Wrong. You may be amazed to find out that this amazing new fuel source is powdered nickel, one of the cheapest and most common materials on the surface of the earth.
Actually, it's powdered nickel and pressurized hydrogen, but quantities so small you would fall of your chair laughing. So small in fact that the reactor only needs a thimblefull or so every six months in it's projected 20 year life expectancy. An as yet undisclosed catalyst enables the reaction, but with patents not yet granted Rossi is staying tight-lipped for now on the secret sauce.
You're thinking what's the downside to all this? There must be some safety issue, after all we're dealing with a fusion technology so there must be radioactive waste products.
Wrong again. The table-top sized reactors leave no trace of radioactivity, simply producing small amounts of copper as a biproduct of the process.
But it's probably decades away from being marketed I hear you say. Nope. Rossi's company in the United States (Leonardo Corporation) is at this very moment gearing up for shipping reactors to customers by late October and mass production to follow on from that.
And for everyone who thinks it must be a scam, Rossi has invested all of his own money in making this a reality and is not accepting offers of investment until the first customer has successfully implemented the working technology. No better peer-review than a working device producing energy.
"We are dealing with a highly disruptive energy technology that is 10-30 times cheaper than conventional energy generation, it's also completely clean and has a virtually inexhaustible fuel supply. It doesn't take a genius to figure out why some folks would see this as a threat." - Free Energy Truth
The first sector to benefit from installation will be factories and industry where red-tape and certifications are limited compared to the safety requirements for home reactors. However, they will no doubt follow soon after as the technology is further refined and developed, no doubt becoming smaller and even MORE efficient over time.
Rossi stated that they have had one reactor running constantly for the last 2 years providing heat for an entire factory. So efficient in fact that the electricity costs were reduced by 90%.
So why have you not heard about this on TV or read it in the newspapers? Well, if you lived in Greece you WOULD have already heard about it. Greek television, a Swedish Tech Blog, PESWIKI and a handful of other alternative media blogs(including this one) HAVE been talking about it since January, desperately trying to get the news out. But a mixture of Charlie Sheen's exploits, two Germans getting hitched and an impenetrable wall of sickly sweet Justin Bieber hype has meant our own "torpedo of truth" has all but missed the U-boat of mainstream news.
But for one article in the Washinton Times, mainstream news coverage has been non-existent, and if you know anything about corporate control of the media it won't take you long to figure out why.
We are dealing with a highly disruptive energy technology that is 10-30 times cheaper than conventional energy generation, it's also completely clean and has a virtually inexhaustible fuel supply. It doesn't take a genius to figure out why some folks would see this as a threat.
Meanwhile, events at the stricken Fukoshima nuclear plant show no sign of improvement. With seawater now contaminated, fish showing signs of contamination and radiocative Iodine 7.5 million times the safe legal limit found near the reactor there can be absolutely no doubt now in anyone's mind that nuclear is not an option.
We now HAVE an alternative, wake up and smell the penne al aribiata!
So in the end, will the Free Energy Truth of an impending energy revolution eventually breach the attention deficit disorder of the distracted masses of Bieberites and Sheen-esque warlocks?
"Duh, winning."
Steorn Turning Up The Heat In 2011
Monday, March 28, 2011
"3 kW - in the palm or your hand - just so cool!" was tweeted about 8 hours ago and then quickly followed by a reply to a question from another Twitter user.
Nondual - @SteornOfficial no pics? no videos?
"SteornOfficial - @nondual Yep, within the next 4 weeks we plan to release info on a 15 kW heating element."
If Steorn are working on a 15KW heating element then this would indicate they are working on a specific product / device and this would be a shift in direction away from their policy of not making specific products.
Previously their stance to allow others to develop the platform technology (ORBO) into specific products and applications.
During the e-Orbo demo in 2009/10 the test rigs shown were many times overunity and produced lots of energy mostly in the form of heat. If Orbo's first real world application is generating heat then this would be an ideal first product for the company to take to market.
Andrea Rossi Talks About The Energy Catalyzer On Coast To Coast AM
Friday, March 25, 2011
Cold fusion device the "Energy Catalyzer" looks almost certain now to become a fully realised technology. Finally ending fossil fuel dominance and beginning an energy revolution.
Italian inventor, Andrea Rossi appeared on last night's cult radio programme Coast To Coast hosted by George Noory alongside veteran Free Energy Researcher Sterling Allen of PESWIKI.COM. Rossi does not have the best English but managed to speak for a short time on his energy vision for humanity rather eerily on the 22nd anniversary to the day of Pons and Fleicshmanns original cold fusion announcement.
Over 500 radio stations accross America and many thousands more listeners on the internet heard how Rossi is initially making his device to cater firstly for industrial use in factories and manufacturing plants for both heat and power generation. The home market requires many more safety certification hurdles that will take time to negotiate. Industrial adoption of the E-cat does not require nearly so many legal hurdles and so will lend itself to quick take up and replacement of traditional energy generation. Rossi has sold his previously very successful business in order to finance the E-Cat development and research, spending millions of his own money in the process.
Rossi went on to say how a one megawatt facility would cost an estimated two million dollars to set up, with the energy produced costing roughly 1 cent per kilowatt-hour. At current prices this is about 4 times cheaper than conventional energy generation. This is a very impressive figure when you consider that this technology is in it's infancy.
The next decade could see power outputs and efficiencies of the energy catalyzer increase dramatically.
Sterling also talked about several other promising energy technologies that are coming to maturity, some of which could also be with us by the end of the year.
This is absolutely in line with the prediction made by Gerald Celente of Trends Research at the start of the year. In fact Celente made the prediction only 1 or 2 weeks before news of Rossi's Energy Catalyzer emerged from Italy.
Read Sterling's report here:
http://pesn.com/2011/03/24/9501795_Andrea_Rossi_with_Sterling_Allan_on_Coast_to_Coast_AM/
Cold Fusion: Rossi Focardi Energy Catalyzer Produces 15Kw over 18 hours
Thursday, February 24, 2011
An amazing new experiment using Sergio Focardi And Andrea Rossi's energy catalyzer has been performed producing a minimum of 15Kw over 18 hours. A minimum of 15 kW was produced continually for 18 hours, coming to a total of 270 kWh or 972 MJ.
The experiment was conducted in Bologna, Italy on 10th February and was observed by Dr. Levi himself and other witnesses. This new experiment follows a successful private demonstration of the unit which was previously held on January 14th.
Bologna University physicist and researcher Dr Giuseppe Levi was present to monitor the experiment.
Levi stated:
“It was pretty impressive in some respects. First, the repeatability. This is the third time I’ve seen the device, and again it produces energy.”
“The second thing is that this time we loaded the unit with hydrogen at the beginning, and then the bottle was closed. It then worked for 18 hours with the bottle closed. Quite impressive.”
“I weighed container before and after charging, and including the gas we let out to empty the tube of air, the consumption of hydrogen was 0.4 grams. That’s nothing!”
“Minimum power was 15 kilowatts, and that’s a conservative value. I calculated it several times. At night we did a measurement and the device then worked very stable and produced 20 kilowatts.”
“Now that I have seen the device work for so many hours, in my view all chemical energy sources are excluded,” said Giuseppe Levi.
In this particular experiment they opted to heat the water instead of boiling it to avoid any errors. The initial water temperature was 7 degrees Celsius and for some time the oulet temperature was measured at 40 degrees Celsius.
According to Levi, the input electrical power to 'ignite' the device was about 1250 watts for five to ten minutes. It was then reduced to about 80 watts, equivalent to the power consumption of the control unit.
“This time I opened the control unit (and examined the interior), as someone said that it could contain a hidden battery. And I can swear in court that the box was empty, except for the control electronics – five very simple PLCs – and it weighed about seven kilograms,”
“I have also seen inside the unit itself – most of the volume is isolation, and most of the weight of about 30 kg is due to lead.”
“If I then, using the most accurate methods possible, really see changes in the nuclei, then we have new physics. There is nothing you can say about it,” he said.
Speaking to Swedish Tech Website nyteknik.se Levi said:
“If I were an old professor with his career already done, then I would not have anything to risk. But any attempt at fraud on my part would be a terrible personal goal. What could I hope for? To have a title for ten days, and then be thrown from my own department. Because (the matter of) fraud comes up sooner or later. There is no hope for it. So if I ... well, I would be really stupid. Honestly, I would be really stupid!” said Levi.
More Coverage
Peswiki - http://pesn.com/2011/02/22/9501770_Rossi_cold_fusion_reactor_achieves_15_kW_for_18_hours/
TechNewsWorld - http://www.technewsworld.com/story/Cold-Fusion-It-May-Not-Be-Madness-71916.html
NyTeknik.se - http://www.nyteknik.se/nyheter/energi_miljo/energi/article3108242.ece
Gerald Celente Of Trends Research Predicts 2011 Free Energy Revolution
Tuesday, January 11, 2011
Steorn Orbo: Independent Tests Confirm 320% Overunity For New Solid State Board
Thursday, September 30, 2010
More details to follow soon.
Gulf Of Mexico Oil Spill : An Iconic Image Of Hope
Tuesday, June 1, 2010
Don't be a passenger. Get involved in changing the future. Engineer oil out of our lives.
http://www.steorn.com/skdb Read more...
Self Running Coil - Is this Overunity?
Wednesday, March 17, 2010
How Much Longer Can You Hold Out?
Wednesday, December 30, 2009
Not just the BBC, but Engadget, The Economist, Forbes, Wired, TechCrunch, Ben Goldacre, et al. How much longer can you ignore what's happening in the world of free energy and how long into January before you finally catch on to story of the century? Time will tell.
Steorn Orbo Demo / LIVE Camera WebFeed And Latest Updates.
Tuesday, December 15, 2009
Last bit of news is a YouTubeVideo which you simply must watch. Achieves a subtle combination of being hilarious, yet devastatingly serious at the same time. Check it out.
Goodwins, Steorn, And The Marzipan Hat
Wednesday, October 14, 2009
In Goodwins blog he again mocks the Dublin based tech firm with "Welcome back my friends to the magnetic machine story that never ends"and other such witty remarks. It's an article choc full of opinion and pot shots but sadly thin on facts and research.
Judging by the content he has been all over their website trying to deconstruct their argument that they are JUST ABOUT TO COMMERCIALIZE AN OVERUNITY TECHNOLOGY. Had he bothered to look on the front page of their website he would have seen the video featuring 3 external engineering consultants who all state quiet clearly that Steorn's technology produced unexplainable gains of energy in separate independent tests.
Goodwins fails to inform his readers of this and didn't bother to try and make contact with any of the named individuals to verify their testimony. Just the sort of (fair and balanced) coverage of Steorn we've come to expect. Sarcasm intended.
In 2006 Goodwins gleefully stated that if Steorn were the real deal and they produced an overunity device he would gladly eat a hat made entirely from marzipan.
Steorn
Friday, August 21, 2009
The events over the last week and especially the last 24hrs have been more than worth the 3 year wait. And to see so many good people work together with purpose has been inspiring.
Thank-you Steorn for allowing me to be part of it.
The Steorn SKDB 300 moves forward
Saturday, April 18, 2009

Email reveals that the Steorn SKDB 300 plan is progressing nicely.
We are moving increasingly closer to the full commercial launch and worldwide introduction of free energy technology - still considered a heresy by establishment science and academia.
According to an official Steorn email revealed today by this site the closing date for applicants wishing to be part of "The SKDB 300" was Friday 17th April. FE Truth can confirm that there is information pertaining to the email that absolutely confirms it's authenticity. We have other folks who have since came forward with the same email also.
At the start of the year Steorn set out to establish a 300 strong group of established engineering companies and qualified individual engineers. This group will be given the opportunity to engineer, build, and prototype Orbo technology in a specialized online collaborative environment called the SKDB before the full public launch. Public launch is considered Phase2.
This first group, known as "The SKDB300" (Steorn Knowledge Database 300), will join the already long established internal "OS OrboSphere" group (of which FE Truth is a member).
The SKDB will begin a pre-commercial development phase to facilitate a faster introduction of "real-world products". Entry to the SKDB300 is free for any accepted suitably qualified engineering applicants. The 300 will be required to sign a development license. This license enables the holder to engineer and build Orbo powered systems. Should the license holder wish to commercialize any product they develop using Orbo free energy technology they will be required to upgrade to a full commercial license.
These systems will utilise specific configurations of magnets which produce overunity performance - ultimately producing free, clean and constant energy.
The Orbo energy revolution draws ever nearer.
Amazing New Video: Howard Johnson (Stonehenge) Magnet Motor
Friday, March 20, 2009
IMPORTANT FE TRUTH UPDATE : This story was later later shown to be a hoax. The MYLOW motor used concealed fishing line which was only spotted weeks later after some video analysis.
User MYLOW has posted an update to the previous video of his working magnet motor. The rig itself is a copy of the one that Howard Johnson worked on in the early 80's nicknamed "Stonehenge". The video (if validated) is utterly remarkable.
See for yourself
Discuss this new development in our forum.
What happened to Steorn and Orbo?
Wednesday, November 5, 2008
There have been lots of web searches for "Are Steorn still alive" and "Steorn 2009" not to mention"Are Steorn still on the go?" and my favourite of all time "What happened to Orbo?".
As you can see yourself from the visiting Steorn's website and forum - Steorn are indeed still around and have not disappeared anywhere. Meanwhile Orbo, Steorn's free energy technology, is a reality that some have not accepted yet and will not allow themselves to get excited about as it's a "too god to be true" technology.
Well, sometimes fact is stranger than fiction and sometimes the bread lands on the floor jam side up. The doom mungers have had it their way for way too long, so it is time to show them the door and welcome the reality of change and what free energy technology will mean in YOUR daily life.
Free limitless energy is able to be tapped and it will bring a wave of new technologies and convenience to everyone.
Massive change will be on the way when Orbo validation occurs. Just think of the amount of things in your daily life where energy is involved and where having endless free energy on tap will improve the quality of your life.
To the people who say it cannot be done, the flat earth society's membership forms are now available and can be collected from the foyer.




