Andrea Rossi Talks About The Energy Catalyzer On Coast To Coast AM

Cold fusion device the "Energy Catalyzer" looks almost certain now to become a fully realised technology. Finally ending fossil fuel dominance and beginning an energy revolution.

Italian inventor, Andrea Rossi appeared on last night's cult radio programme Coast To Coast hosted by George Noory alongside veteran Free Energy Researcher Sterling Allen of PESWIKI.COM. Rossi does not have the best English but managed to speak for a short time on his energy vision for humanity rather eerily on the 22nd anniversary to the day of Pons and Fleicshmanns original cold fusion announcement.

Over 500 radio stations accross America and many thousands more listeners on the internet heard how Rossi is initially making his device to cater firstly for industrial use in factories and manufacturing plants for both heat and power generation. The home market requires many more safety certification hurdles that will take time to negotiate. Industrial adoption of the E-cat does not require nearly so many legal hurdles and so will lend itself to quick take up and replacement of traditional energy generation. Rossi has sold his previously very successful business in order to finance the E-Cat development and research, spending millions of his own money in the process.

Rossi went on to say how a one megawatt facility would cost an estimated two million dollars to set up, with the energy produced costing roughly 1 cent per kilowatt-hour. At current prices this is about 4 times cheaper than conventional energy generation. This is a very impressive figure when you consider that this technology is in it's infancy.

The next decade could see power outputs and efficiencies of the energy catalyzer increase dramatically.

Sterling also talked about several other promising energy technologies that are coming to maturity, some of which could also be with us by the end of the year.

This is absolutely in line with the prediction made by Gerald Celente of Trends Research at the start of the year. In fact Celente made the prediction only 1 or 2 weeks before news of Rossi's Energy Catalyzer emerged from Italy.

Read Sterling's report here:

http://pesn.com/2011/03/24/9501795_Andrea_Rossi_with_Sterling_Allan_on_Coast_to_Coast_AM/

Read more...

Sterling Allan and Andrea Rossi TONIGHT On Coast To Coast AM

Sterling Allan, researcher and founder of Peswiki.com will be joined by Andrea Rossi (Inventor of The Energy Catalyzer) tonight on Coast To Coast AM with George Noory. Among other promising energy technologies Sterling will be discussing Rossi and Focardi's very promising cold fusion technology which looks set to transform energy generation.

The first two hours of the show George will talk with author and researcher David Icke.

http://www.coasttocoastam.com/show/2011/03/23

Read more...

Steorn Replications: More Interesting Developments

In the past 24 hrs a prominent French engineer has been replicating some key aspects of the of the Orbo motor. French replicator, Jean-Louis Naudin, has tested and confirmed that he encountered no counter electromotive force CEMF / back EMF in his replication.

In his own words:

"The Steorn engine reproduced here confirms the observations and the measurements submitted on December 15, 2009 by Sean McCarthy in Dublin. This engine, an atypical configuration, is really very interesting and worth to be explored and developed because it presents a characteristic of non-reciprocity of the energy load on the power source through the breaking of the symmetry (regauging effect). Other experiments and tests will soon be conducted to better understand and improve this innovative principle.  Using the potential energy of magnets to produce a clean and free energy is really worth exploring and developing very seriously for the future of our planet." 

In corerespondance recieved by Sterling Allan he gets some feedback from Steorn CEO Sean McCarthy on Naudin's replication attempt. Read Sterling Allan's Peswiki article here.

"Thanks for that - however I must urge some caution here, what Jean-Louis will find is that all of his electrical input is being output as heat and that the work done by the rotor is free. However this does not mean that simply putting in a generator will enable him to close the loop.


The reason is that the design of the 'active' coils is very important so that the input uses minimum current to cause the effect in question - the production of heat is a current^2 relationship. Unless this fact is considered in the design of the input, then while the system may be more than 100% efficient, the work done by the rotor will be less than the energy input into the system, and so a closed loop system will not be possible.


Our next sequence of experiments will address these issues.


We are quite happy to discuss this in more detail with Jean if he has further interest in replication (two of our engineers are French, so they should be able to communicate well)."

Jean-Louis Naudin's Steorn Page 
Jean-Louis YouTube Channel

Meanwhile one of the guys at overunity.com has been busy as well.


"First test run of my Steorn motor replication. Utterly amazing!!! Using just two toroidal coils I can get this motor to over 2000 RPM with just 100ma of power at 12V input!!!!"

Steorn Replication Thread Over At Overunity.com

Read more...

MYLOW Magnet Motor Update: Another 18 Hours Continuous Operation

IMPORTANT FE TRUTH UPDATE : This story was later later shown to be a hoax. The MYLOW motor used concealed fishing line which was only spotted weeks later after some video analysis.

Sterling Allan from www.overunity.com has given another update after speaking with MYLOW today. Reproduced below:

"I spoke with Mylow this evening as he was driving home then arriving, to see the motor still turning. He has had it running since 1:00 am Central last night."

"As he walked back in his house, it was still running. "It's still running real fast." We timed it at about 140 rpm (33 revolutions/15 seconds). He stopped it to try something at around 7:10 pm Central, so it had been running around 18 hours continuous, with no apparent slow-down."

He said it took him 8-10 hours last evening and into the night to figure out how to get the "red" magnet that I sent him will work stably.

He ended up with a configuration of sets of 7, followed by a space of 2 1/4 inches before the next set. Then the last set has 6 magnets, and the final gap before the first set starts again is 4.5 inches.

"It took me all night to figure out how that red magnet works. It's all trial and error. There's a pattern here. Pattern changes when you change a variable."

"Now it's working beautifully."

He had the stator magnet about 1.5 inches away from the rotor magnets.

"While we were on the phone, he move it a little closer, and said it started spinning faster -- too fast for him to count."

"He's been talking to his attorney to get advice about the right way to proceed with this thing. Apparently, the attorney will be coming over this evening. He's waiting for that before he posts his next video."

"I talked him into at least moving the motor over into the kitchen on the glass table so that it's ready to film."

While we were talking, he had a little crash in which four of the rotor magnets came off.

"He asked me to stop sending him any more magnets. He likes how this one works, and he doesn't want to have to keep re-arranging the rotor magnets with each new stator magnet."

"He said when you change magnet strength, it changes gapping, spacing between rotor magnets and between rotor and stator magnets."

"It's not easy changing orientation of some 50 magnets."

Different shape/type of magnet, have to change it. "If you change something, you have to change everything else." Now here's something fascinating. He said that the stator magnet gets cold. His brother had noted that to him.

"While Mylow and I were on the phone this evening, he took out a thermometer. He said the room temperature was 68 degrees. Then he put it on the magnet and started reading the temperature as it dropped down to about 55 degrees F. This was at around 7:14 pm, some four minutes after he stopped the motor."

He said the rotor magnets were at room temperature.

"It did that with iron magnet too."

In his present set-up, the bottom of the stator magnet is level with the bottom end of the protrusion of the top of the rotor channel magnets. When he started the motor up again at 7:18pm it took about 15 seconds to reach its equilibrium speed.

He's always talking about the "sweet spot" where the motor starts. That refers to where if he lets go of the rotor it begins turning and accelerates up to its equilibrium speed.

"I asked him what happened if he just gave the rotor a little spin. I got the impression that he'd never tried that before. He is so set on the idea that he wants this thing to self start, that the idea of giving it an initial boost did not occur to him? I may be wrong."

"Anyway, he said, "When I do that [give it a kick start] it starts spinning."

Sterling

Read more...

MYLOW Interviewed by Sterling Allan

IMPORTANT FE TRUTH UPDATE : This story was later later shown to be a hoax. The MYLOW motor used concealed fishing line which was only spotted weeks later after some video analysis.


Sterling Allan of PESWIKI.COM yesterday conducted an hour long interview with MYLOW who is based in Chicago, USA. MYLOW talks extensively about his very recent successful replication of the Howard Johnson (Stonehenge) Magnet Motor.

MYLOW has emphasized having tried previously to replicate the motor using the patent drawings that he was unsuccessful. It was only when he discarded the patent drawings and used photographs of the original motor that he had success.

The patent drawings upon examination do not seem to show the C shaped magnets that are in the actual photographs.

MYLOW goes on to mention his absolute disbelief when he seen the motor run by itself for the first time.

The interview can be downloaded here.

Read more...