Steorn Examine Attempted Replications Of Orbo Technology

A video produced just yesterday highlighting the differences between Orbo and the attempted replications so far.  In the video we can see that the replication attempts so far have not cancelled CEMF properly and are therefore not true replications. With CEMF still in these systems they are just still pulse motors.

No doubt as more information is shared that this will change and we'll start to see some valid 3rd party replications.

Read more...

Steorn Replications: More Interesting Developments

In the past 24 hrs a prominent French engineer has been replicating some key aspects of the of the Orbo motor. French replicator, Jean-Louis Naudin, has tested and confirmed that he encountered no counter electromotive force CEMF / back EMF in his replication.

In his own words:

"The Steorn engine reproduced here confirms the observations and the measurements submitted on December 15, 2009 by Sean McCarthy in Dublin. This engine, an atypical configuration, is really very interesting and worth to be explored and developed because it presents a characteristic of non-reciprocity of the energy load on the power source through the breaking of the symmetry (regauging effect). Other experiments and tests will soon be conducted to better understand and improve this innovative principle.  Using the potential energy of magnets to produce a clean and free energy is really worth exploring and developing very seriously for the future of our planet." 

In corerespondance recieved by Sterling Allan he gets some feedback from Steorn CEO Sean McCarthy on Naudin's replication attempt. Read Sterling Allan's Peswiki article here.

"Thanks for that - however I must urge some caution here, what Jean-Louis will find is that all of his electrical input is being output as heat and that the work done by the rotor is free. However this does not mean that simply putting in a generator will enable him to close the loop.


The reason is that the design of the 'active' coils is very important so that the input uses minimum current to cause the effect in question - the production of heat is a current^2 relationship. Unless this fact is considered in the design of the input, then while the system may be more than 100% efficient, the work done by the rotor will be less than the energy input into the system, and so a closed loop system will not be possible.


Our next sequence of experiments will address these issues.


We are quite happy to discuss this in more detail with Jean if he has further interest in replication (two of our engineers are French, so they should be able to communicate well)."

Jean-Louis Naudin's Steorn Page 
Jean-Louis YouTube Channel

Meanwhile one of the guys at overunity.com has been busy as well.


"First test run of my Steorn motor replication. Utterly amazing!!! Using just two toroidal coils I can get this motor to over 2000 RPM with just 100ma of power at 12V input!!!!"

Steorn Replication Thread Over At Overunity.com

Read more...

Steorn On Christmas Break: More Fun In Store For January!

As their site now shows, Steorn are now on holiday for Christmas and New Year.  The LIVE demonstration of overunity will resume on January 5th, and will be screened exclusively from Steorn.com  More interesting however is Steorn's plans to show more significant proof of their free energy producing technology - Orbo.

Steorn have posted a message on their forum which alludes to the fact that the cancellation of Back EMF was only just the beginning of the reveal and that things will ramp up in January.

"Folks,

Hope that you all have a great Holiday - the fun starts in January - hope to see you then.

Thanks,

Steorn"

There are at least 3 more LIVE experiments planned where Steorn will be connecting other equipment to the demo device to prove it's overunity capability. If you happen to miss the LIVE sessions they are being recorded and can be viewed on the  Steorn YouTube channel.

Recently Steorn demonstrated Orbo's ability to completely cancel CEMF (Back EMF).

Look Mum - No back EMF!

On February 1st anyone wishing to develop Orbo free energy projects for themselves and understand how Orbo works will be able to join the SKDB and participate with other like minded individuals.

Subscribe to Steorn YouTube Channel here
Find out more about how to access Orbo technology for yourself here

Read more...

Steorn: Expect 3rd Party Validation / Cancelling Back EMF

Steorn show an overunity pulsed motor with no Back EMF then tell us "Expect 3rd Party Validation".

Steorn were back today after their amazing first experiment in a series of four to be shown LIVE throughout January. Having been fascinated by the Royal Institution Christmas lectures as a lad this experiment was a reminder of that and also a taste of what's to come in the form of some new and cool science on the menu for January.

Steorn offered some tantalising answers to questions on both their public forum and their official YouTube channel.  We'll come to the Question and Answer session in a minute, but first, the experiment. For anyone who missed it, it quite clearly demonstrated that there was no back EMF being generated in their Orbo system - video is below.

Through the Lenz. Scope trace reveals a severe lack of back EMF - nice work.

Yesterday, Steorn through their official YouTube channel and their public forum responded to some questions posed by members of the public also.  A selection of the highlights from these comments now follows.

iainduncansmith: Hello Mr Steorn,
Can we expect some independent, 3rd party, validation of your device as part of the demo in January? 

Steorn: You sure can.

makeitlookreal: What is the maximum percentage of back EMF reduction you have been able to achieve?
Steorn: If care is taken with the setup, then 100% cancellation is possible.

waseatenbyagrue@SteornOfficial

Wow, thanks for the quick response. If what you say is true about 100% of the electrical energy dissipating as heat, then you have something. My objection is that Sean seems to imply that the Orbo somehow violates Lenz's law, and that the absence of BEMF is something unusual and unique here, when in fact it is entirely expected. Many scope shots are then used to demonstrate this irrelevant point. The focus should be on proving input v. output, thats all, IMHO.

Steorn: Hi - the experiment that was shown last night is part of a sequence of tests that we will be putting into the public domain, the final experiments showing the net input/output of the system (and addressing the question of if the magnets themselves 'erode'). In order that there is greater transparency of this we are doing the tests in a defined order. The key point being that the electrical energy put into the system is all dissipated as heat - for this to be true then there must be no BEMF.

littlehaste: At the risk of being a pest, I'll repeat a question I asked in the Steorn forum:

Why not take that superb oscillocope of yours and place the non-contact current probe around one of Orbo's battery wires and connect the differential voltage probe across the battery. I'm sure everyone would enjoy seeing that set of traces and it could be used to show what the net flow of power is between Orbo and the battery.

Steorn: We will be doing that :-)

Read more...