Cold Fusion Device E-Catalyzer Granted Italian Patent

Wednesday, May 11, 2011

Andrea Rossi's revolutionary new cold fusion technology, the "Energy Catalyzer" which is in full production at this moment, has been granted an Italian patent.

The Italian Patent Office granted a patent for Rossi's energy catalyzer on 6th April.  The patent runs out on April 9th 2028. The granting of the patent is yet another significant step in the acceptance of this legitimate technology on it's path to worldwide acceptance.

Rossi's energy catalyzer or "e-cat" as it is also known, has a power density to cost  ratio which beats all fossil fuel sources hands down, is completely safe and has the added benefit of being scaleable from 2.5Kw to Multi Megawatt facilities. If you couple that with the fact that it's fuel supply (powdered nickel) is so cheap and abundant you can quite clearly see that the energy catalyzer has the ability to revolutionize the world. 

There is no longer any reason to burn oil, coal or gas, except for the fact these fuel sources are already heavily integrated into our existing infrastructure. The biggest problem for the e-cat at the moment is that most people have not came to terms with the fact that it is a real technology and is not a hoax.  This only goes to prove that as a species we are so highly conditioned to reject anything that goes contrary to accepted physics and beliefs.  Those people who still remain sceptical of the validity of the energy catalyzer should re-examine the validations that have occurred to date.

Since January this year there have been no less than 4 highly impressive and successful demonstrations of the energy catalyzer, each time producing Kilowatts of power from just a few hundred watts input. To date there have been successful validations from University Of Bologna, Italy, and tests carried out in the presence of Sven Kullander (Professor Emeritus at Uppsala University) who is also chairman of the National Academy of Sciences Energy Committee and Prof Hanno Essen associate professor of theoretical physics and a lecturer at the Swedish Royal Institute of Technology and chairman of the Swedish Skeptics Society. Essen sits on the committee that decides Nobel prizes for physics and chemistry. 

Those tests conducted showed energy production that massively exceeds the capabilities of ANY possible chemical reaction.  The conclusion from Kullander and Essen was - "Any chemical process for producing 25 kWh from any fuel in a 50 cm3 container can be ruled out. The only alternative explanation is that there is some kind of a nuclear process that gives rise to the measured energy production."

 ”You just have to embrace a new technology that might solve the energy problems of mankind, at least until it can be rejected,” Swedish professor Sven Kullander said in a scientific discussion on the Italian ‘energy catalyzer’.

Rossi has been holding off on disclosing what the secret catalyst in the nickel / hydrogen reaction is until the patents have been granted. Although an Italian patent has been granted Rossi has said he will not speculate on what he thinks is enabling the reaction until nearer the time of the 1MW facility opening.

The Italian patent is a good first step, but there are still issues to be fought with the granting of priceless European and US patents.

Meanwhile, the coverage from mainstream media has been zero (especially strange when you think of recent events in Fukoshima, Japan). To date only a handful of blogs and sites including this one are regularly reporting the news of these world-changing events and recently I asked Rossi if he had any interview requests from major media to which he answered an emphatic "No".

There are always conspiracy theories surrounding the suppression and denial of important information to the general public that could upset the money and power balance of the world.

In this case however it is conspiracy FACT. One hundred and seventeen (117) days and counting of absolute stonewalled silence on arguably the greatest scientific advance in living history.

NY Teknik Article by Mats Lewan: Cold Fusion: “You have to embrace this” http://www.nyteknik.se/nyheter/energi_miljo/energi/article3111124.ece


US Patent Application
http://worldwide.espacenet.com/publicationDetails/originalDocument?FT=D&date=20110113&DB=EPODOC&locale=en_EP&CC=US&NR=2011005506A1&KC=A1

Read more...

Now THREE E-Catalyzer Factories To Manufacture Cold Fusion Modules

Monday, May 9, 2011


"We have the final product in our hands, not the experimental one, exactly the one that we are going to produce. It works excellent."

  • 3 Cold Fusion Catalyzer Manufacturing Facilities On The Way
  • Final Commercial Product Design Of E-Catalyzer Ready To Go
  • 200 Million In Investment
  • 300,000 Energy Catalyzers Produced Per Year
  • Several "Important Countries" already requesting the Ecat modules.

RAI TV News (an Italian TV station) recently featured a lengthy news item on Andrea Rossi and his energy catalyzer invention.  Among those interviwed were Swedish scientists Sven Kullander of Upsalla University who is also chairman of the Royal Swedish Academy of Sciences Energy Committee and Hanno Essen (Associate professor of theoretical physics at the Swedish Royal Institute of Technology and chairman of the Swedish Skeptics Society). They recently said of the energy catalyzer:

“Any chemical process should be ruled out for producing 25 kWh from whatever is in a 50 cubic centimeter container. The only alternative explanation is that there is some kind of a nuclear process that gives rise to the measured energy production.”


Defkalion Green Technologies

The news item also featured a fascinating question and answer session with executives Alexandros Xanthoulis and David C. Aurel from Defkalion Green Technologies interviewed by Angelo Saso from RAI TV. The Defkalion factory will be the site of the inaugural October 1MW Energy Catalyzer Plant. The plant to be built in Xanthi, Greece, will be the first ever cold fusion power facility in history to be developed. Defkalion will also have exclusive license to manufacture and sell the energy catalyzer modules.




Here, Defkalion executive Alexandros Xanthoulis indicates that the first plant in Xanthi, Greece will be used as a reference site for other businesses interested in pursuing the ecatalyzer for their energy generation needs.

Alexandros Xanthoulis: "The 1MW facility in Xanthi will however we will also use it as a presentation or showcase for future potential interested parties."

Angelo Saso "Is the Energy Catalyzer ready for the market?"

Alexandros Xanthoulis: "We have the final product in our hands, not the experimental one, exactly the one that we are going to produce. It works excellent."

David C. Aurel: "Actually the device what we are going to sell  (or let's say provide) is going to be a 10kW device producing solely heat.

Angelo Saso: "How much will it consume in terms of fuel and money?"

David C. Aurel: "Again speaking about households will have no other charges or costs except for the leasing fee because we will provide all the ingredients for the device."

Angelo Saso: How many devices will you run out?

David C. Aurel: "As many as we can produce. As a rule of thumb we can assume a final full capacity of 300,000 units per year."

The narrator Angelo Sasso then goes on to say that "A factory to commence production and a further 2 on paper." So it would seem that the plant in Greece is just the first of at least THREE energy catalyzer facilities.

The question of who is behind this company comes up and is answered by David C Aurel - "Defkalion is funded by a group of non-governmental entities. It's not just private investors but they are entities also in industry and international. They come from different parts of the world."

Angelo Saso: How much money will be invested in the project?

"Well to cover Greece and Balkans we estimate about 200 million.. I believe it 100%, our investors believe it 100%. and if you see the messages we are getting from all over the world, they believe it 100%. There are several countries (important countries) who are already requesting to buy the product from us.

Watch the full video report in English here:


Read more...

The Magic Of Mr Rossi: E-Catalyzer Set To Transform Energy Landscape

Saturday, May 7, 2011

No words needed. Just watch the video. Report to follow.

Read more...

170 E-Cat Fusion Modules Now Ready For Installation

Thursday, May 5, 2011

Today we learned from Andrea Rossi that 170 of the 300 E-Cat Fusion Modules required for the 1MW plant in Greece have been produced.  

Rossi is a very hard working individual and is currently doing 18 hours a day, getting up at 5am and working most of the time in his factory helping to make the E-Cat modules for the opening of the first fusion power facility, or "catalyzer farm".

The plant which is due to open in October this year will consist of 300 E-Cat modules linked together.  The objective is simple: "to make heat".

Yesterday, Rossi's technology was featured on Italian TV News station RAI.  Unfortunately it is not accessible to anyone who doesn't speak Italian. However, it did spread more awareness (at least in Italy) that we have a new primary energy source. 


RAI TV News Feature On Rossi's Energy Catalyzer

In another intriguing question and answer session on his website, Rossi was asked "Have you ever observed the inside of your reaction chamber through a window of some sort when it is operating? If there is electron movement in the nickel from shell to shell there should be energy jumps which will produce visible photons.The area about the nickel should be illuminated."

Rossi gave a very interesting reply: "Yes, I did. The information about what I saw is confidential."

Meanwhile, the mainstream media are still holding out their record breaking silence on the Rossi story - which is probably the biggest story in a lifetime. Instead of the conveniently overlooked news that we are on the verge of an energy revolution that will affect every man woman and child, we are being fed live CNN coverage of Osama Bin Laden's second death.  The first death he had was in 2002 from Kidney Failure, the second seems to be from the results of being defrosted.


Read more...

Rossi Energy Catalyzer Further Validated By NyTeknik

Tuesday, May 3, 2011

Andrea Rossi's Cold Fusion Technology the Energy Calalyzer or "E-Cat" has been successfully validated by Swedish Technology Magazine NYTeknik - Seaparate Test will be on Italian TV News Thursday May 5th

Rossi and associate at the April 28th tests

The new tests were conducted in Bologna on 19 and 28 April, 2011. "The objective was to measure the net energy that the device generates as accurately as possible." "The results of the two tests showed a developed net power of between 2.3 and 2.6 kilowatts – of the order of a large stove plate. Input electric power was in the order of 300 watts." Using a smaller e-cat (e-kitten) than normal the team calculated the output power from the amount of water boiled into steam. 

(ESSENTIAL VIEWING: Video embedded in NYTeknik article is in English and shows technical explanation of various parts and also the E-Cat in Operation)

This news now provides FURTHER INDEPENDENT validation of Rossi's cold fusion technology after Swedish scientists Hullander and Essen also validated the power output just recently.

E-Cat Test To Be Shown On Italian Television

In the first test on April 19, the national Italian television channel RAI was present and its report will be broadcast on the channel RAI News (live streaming here) Thursday, May 5th at 20:35. In the second test on April 28 only Ny Teknik, the inventor Andrea Rossi, and a colleague of his were present.

We've been tracking the major developments in the story since January and have produced the following 2 videos for people who want a quick summary of the important events.

The Story Of The Andrea Rossi Energy Catalyzer - Part 1

The Story Of The Andrea Rossi Energy Catalyzer - Part2

See the amazing video clip and read the report by NYTeknik here: http://www.nyteknik.se/nyheter/energi_miljo/energi/article3166552.ece


Read more...

Billion Dollar Bribe To Suppress Water Fuel Secrets: Mister "X" To Reveal All

Monday, May 2, 2011


Glen Canady Announces That Mister X Will Reveal All On Wednesday Night's Show

A man who claims to have had 10 attempts on his life after refusing a $1Billion bribe to walk away from his water fuel invention will reveal all on Wed night radio show.

The information comes from this YouTube video released by Glenn Canady from Project.Nsearch. It has been claimed that the inventor (unnamed as yet) will reveal technical details of the water fuel technology on  "Late Night in the Midlands" radio show this coming Wednesday 10PM EST.

The inventor claims to have been running his Dodge Pickup on just water which bears a remarkable resemblance to the story on Frederick Wells of Future Energy Concepts which PESWIKI.COM reported on in August 2010 - see video below.

The August video showing a remarkably similar Dodge Pickup that runs on 100% Water

Inventor Stanley Meyer who similarly powered a dune buggy with nothing but water was murdered on March 21st 1998 after dining in a restaurant. His own hydroxy technology would have eliminated Trillion dollar oil interests if it had been allowed to come into full development.  It is hardly surprising that this gentlemen (the as yet unnamed Mister X) has had attempts on his life.

Glen Canady's Article On This

Project Nsearch

PESWIKI Coverage

Late Night In The Midlands
http://www.latenightinthemidlands.com/


Read more...

Contact

Contact me at mailto:contact@overunity.co

  © Blogger template The Professional Template II by Ourblogtemplates.com 2009

Back to TOP